Developing a hybrid emulsion polymerization system to synthesize Fe3O4/polystyrene latexes with narrow size distribution and high magnetite content

A hybrid emulsion polymerization was formulated for synthesizing Fe₃O₄/polystyrene composite latex. This system, containing binary droplets that are magnetic (Mag)‐droplets with a diameter of 100–200 nm and styrene (St)‐droplets with a diameter of 3–4 μm, was obtained by mixing Mag‐miniemulsion and St‐macroemulsion. With extremely low surfactants concentration (?critical micelle concentration, CMC), the nucleated loci are selectively controlled in the Mag‐droplets, as the result of smaller droplet size and larger surface ratio. Both water‐soluble potassium persulfate (KPS) and oil‐soluble 2,2′‐azobis(2‐isobutyronitrile) was adopted to initiate the polymerization. In the presence of KPS, magnetic polystyrene latices with particles size of 60–200 nm, narrow size distribution, and high magnetite content (86 wt % measured by TGA) were attained successfully. The synthesized magnetic Fe₃O_4/polystyrene latices assembled into well‐ordered hexagonal structure in the surface of a carbon supported copper grid. The influence of various parameters on various aspects of the as‐synthesized Fe₃O₄/polystyrene was investigated in detail: type of initiator on composite morphology, feed ratio of Mag‐miniemulsion and St‐macroemulsion on magnetite content, and hydrophobic agent or amount of surfactant on size and size distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5285–5295, 2007     

A combined mixed and discontinuous Galerkin method for compressible miscible displacement problem in porous media

In this paper, we present a numerical scheme for solving the coupled system of compressible miscible displacement problem in porous media. The flow equation is solved by the mixed finite element method, and the transport equation is approximated by a discontinuous Galerkin method. The scheme is continuous in time and a priori hp error estimates is presented.     

神光Ⅱ上柱形黑腔辐射驱动冲击波

利用神光Ⅱ的八路三倍频激光装置，驱动柱形黑腔产生的x 射线作辐射源驱动台阶铝样品产生冲击波，获得了清晰的冲击波图像，通过冲击波过台阶样 品的时间差获得冲击波速度和压力分别为31.2km/s和17.5×10⁵MPa.采用软x射线能谱 仪通过激光注入孔测量的辐射温度与采用冲击波法测量辐射温度的结果一致. 关键词： 冲击波 辐射驱动 辐射温度     

加热炉内板坯粘塑性下桡变形的研究

在加热妒内，由于高温及重力作用，板坯两端的悬臂将产生下桡变形。悬臂越长，下桡将越大，导致悬臂下桡部分与出口端墙相碰，影响出料而造成事故。本文对加热炉内板坯的下桡变形进行了分析计算。首先，建立了板坯的二维非稳态导热模型并用有限差分法计算了炉内板坯随时间的温度变化；然后建立了板坯悬臂粘塑性变形模型，用有限元法计算了高温条件下由重力引起的悬臂的下桡变形。由此理论模型计算出的板坯抽出温度与悬臂端下桡量与实测结果吻合良好，说明该理论模型及模型计算方法是正确的，可用于对装钢生产进行指导。     

Testing for additivity with B-splines

Regression splines are often used for fitting nonparametric functions, and they work especially well for additivity models. In this paper, we consider two simple tests of additivity: an adaptation of Tukey's one degree of freedom test and a nonparametric version of Rao's score test. While the Tukey-type test can detect most forms of the local non-additivity at the parametric rate of O(n-1/2), the score test is consistent for all alternative at a nonparametric rate. The asymptotic distribution of these test statistics is derived under both the null and local alternative hypotheses. A simulation study is conducted to compare their finite-sample performances with some existing kernel-based tests. The score test is found to have a good overall performance.     

绿色荧光粉YAGG∶Tb,Gd用于FED的尝试

FED器件的发展迫切需要具有化学和热稳定性 ,高亮度 ,长寿命的新型荧光材料。本文合成了Gd3 +离子共掺杂的YAGG∶Tb获得了YAGG∶Tb ,Gd ,并将其用于 0～ 30 0 0V低压范围 ,对其在不同电压和电流密度下的发光特性进行了测试。结果表明 ,该种材料特性优于ZnO∶Zn并且不存在电压与电流饱和     

Heisenberg群上一类左不变LPDO的局部基本解及局部可解性

In this paper it is proved that local fundamental solution exists in some space W^m(H_n) (m∈Z), if the left invariant differential operator on the Heisenberg group H_n satisfies certain condition. The main results are:l.Let L be a left invariant differential operator on H_n. If there exist R≥0, r,s∈R and operators {B_λ|λ∈Γ_R} ∈V^s(Γ_R, M^r) such that, for almost all λ∈Γ_R, B_λ is the right inverse of Ⅱ_λ(L), then there exists E∈W^m(H_n) (when m≥0 or m even) or E∈W^m-1(H_n) (when m<0 and odd) such that LE =δ(near the origie) Where m=min([r],-[2s]-n-2); 2. Let L(W,T) be of the form (3.1). If there exist R≥0 and r,s∈R such that when |λ|≥R,(?) and C_λ≥ C|λ|^x(C>0), then the same conclusion as above holds with m=min(-[2r]-n-2,[-2s]-n-2).